First of all, said the wall, generally the owner to install the glass in the Corner was already finishing decoration work. This time is the master of the most fitting outcome of care, we install the glass retaining angles should be careful not to dirty his wall, so prepare in advance a white glove. Secondly, Yang said that the wall angle, as it often contact with people or objects in the building when the structure and the internal structure of the wall is not the same. Internal walls with lime mortar, while yang is the internal angle of cement mortar, the thickness is usually in the 12mm thick, in order to increase the intensity of Yang angle. Even so, we must be careful when the drill eyes in order to avoid hurt-Yang angle, got into big trouble. Again that the walls, the current structure of the wall construction is generally the construction of concrete structure or frame structure, and have spent a lot of reinforcement, then drilling is likely to encounter when the steel bars, then how should we do? We still think of another way bar. Here we will talk about how kind of a person with 20 minutes to complete the installation of a glass Corner.
First: preparatory work. 1. Glass Corner: A group of supporting a group of selected, wipe clean. 2. Hammer: check if working properly, drill bit size is appropriate, it is recommended to use 8mm drill. 3. Pai Line: Hammer used when the power cord is not enough. 4. Mirror nail: the best prepared a few more in order to avoid them defective, or otherwise needs of customers, can be used as gifts. 5. Muse, or expansion plugs: It is recommended to use cork, so as to give their own installation and adjustment of more space. 6. Screwdriver: the word, or cross, according to mirror the set screw nails. 7. Utility Knife: used to cut the size and length of cutting Muse. 8. Hammer: to hit cork. 9. Pencil: used to describe the location of holes, preferably a long pencil thin Youjian You. 10. Gloves: must be clean, preferably white, dark
